You can do this by configuring an HTTP server (e.g. Apache) to listen on port 80 and/or 443 (HTTP and HTTPS standard ports, respectively) and select which site to serve based on the name of the site requested. Apache documentation for this feature is here: https://httpd.apache.org/docs/2.4/vhosts/name-based.html

Note the sample config snippet showing how to set up a simple static site serving both www.example.com and other.example.com using ServerName in a VirtualHost to select between them.

You can also have Apache match a pattern in the URL and reverse proxy to another HTTP server – that can just be another program on the same computer listening on a different port, or could be on another computer entirely. See the simple reverse proxy config example on this page for a starting point: https://httpd.apache.org/docs/2.4/howto/reverse_proxy.html (Note also that you probably don’t need anything further down that page – e.g. the load balancer and failover stuff is not likely to be useful to you for a small personal project.)

Other popular HTTP servers can do this too; I just happen to have done it with Apache before.

I know; they should not be allowed to do that.

Mozilla’s non-profit status needs to be revoked.

Glad I could help you make progress – I hope you can get it all the way working now. Good luck!

How 'bout that! :D

If the SSD itself is OK, then it was probably trying to boot the SSD still. The blank screen issue might have to do with the graphics drivers then? I remember having a similar blank screen problem with Ubuntu a long time ago where I had to put in “nomodeset” as a parameter in GRUB when booting until I got the right drivers set up.

the tablet supports pxe boot. Do you think I could get mileage off of that if I set up a server on my other laptop and connected them via ethernet?

Maybe. If it’s not too much trouble to set up and you can’t get the USB to work again, might as well try it before throwing in the towel.

I’m rather confused by the fact that the USB drive worked for you before but doesn’t any more and yet seems to be OK on other systems. Is there anything like “fast boot” enabled in the BIOS maybe? (Try turning that off if so.)

Also, when you’re trying to boot from the SSD, can you get anything out of GRUB by tapping shift or escape (or maybe other keys) while it’s trying to boot?

Do you think that removing the ssd will help?

It’s a sanity check to help you rule out things like unintentionally booting from the wrong device. Can’t boot from hardware that’s not there! If the USB does work with it removed, then something you believe about how the device boots is false and you can then try to figure out what. A lot of BIOSes will “helpfully” try the next device in the sequence if it can’t successfully boot from the first one – which can be really confusing when debugging.

Some other thoughts for things to check: does the device confirm that it can actually see the USB drive in some way? Does a USB keyboard work in the port you’re using? If there’s more than one USB port, have you tried a different port? Do your USB drives work in another computer?

I rebooted to the installation media to try another install. It was black too.

I assume you’ve probably already checked, but in case not, is the boot order correct? What happens if you remove the SSD entirely and try to reboot to the USB without it?

Also, does the SSD boot in another computer?

If you can’t get anything to boot on the tablet, I’d RMA it.

I have a few of those, and while the ones I bought have worked out fine so far, I think it’s worth cautioning people that they are annoyingly loud doing basic operations.

I tried booting an old Surface off a USB stick with stock Ubuntu once – probably either 20.04 or 22.04. (I tried this in June 2022 but didn’t make a note of the versions in my journal, unfortunately.) I was able to get it to boot, but I couldn’t get touch/pen controls working so I decided against replacing the OS. I didn’t have enough enthusiasm to bother experimenting with it further – I assume it probably needed the custom kernel.

kbin.social has been totally down for a while. I don’t think your posts are actually federating when you post into a kbin.social magazine right now; the votes you are getting are probably from other lemmy.world users only.

Now imagine if to buy a car you had to tolerate cameras and other forms of tracking your telemetry just to get to work and feed yourself.

Sorry to be the bearer of depressing news, but that’s basically already happening in new cars.

https://foundation.mozilla.org/en/blog/privacy-nightmare-on-wheels-every-car-brand-reviewed-by-mozilla-including-ford-volkswagen-and-toyota-flunks-privacy-test/

https://jacobin.com/2024/03/car-spying-insurance-surveillance-data/

A fairly vocal portion of lemmy is AI-hostile, and even for the people who aren’t outright hostile to it, it can be annoying at times – AI content does tend to drown everything else out when it’s permitted, so making a community explicitly for it would probably work better.

lemmy.dbzer0.com might be a good place to host a community specifically for exploring AI generated music if you’re interested in running one. That instance is explicitly open to AI gen and already has several image gen communities, but I don’t think they have a music gen community yet. (Double check though before making one in case I just missed it.)

I wonder what cuil things it will say if you start asking questions about hamburgers instead…

I ran into an example of the thumbnail issue again today – this time on a post from kbin: https://old.reddthat.com/post/19193476

The thumbnail looks like this in the HTML:

<div class="thumb">
  <a class="url"
     href="https://media.kbin.social/media/60/a4/60a45b8ff88b1b2e3a0f77b701feb323c5bbfb7ceeb75154ea7df5d6eea15ef8.jpg"
     >
    <div  style="background-image: url(https://media.kbin.social/media/60/a4/60a45b8ff88b1b2e3a0f77b701feb323c5bbfb7ceeb75154ea7df5d6eea15ef8.jpg?format=jpg&amp;thumbnail=96)"></div>
  </a>
</div>

Note that it’s making a request to kbin.social with ?format=jpg&thumbnail=96 parameters in the CSS – which results in the full image being loaded since kbin doesn’t run pictrs.

The versions in use on reddthat (according to the settings page) are:

lemmy: 0.19.4-beta.7

mlmym: 0.0.44

Mrs Bighead?!

…

*hangs up the phone*

Personally, I prefer it when people do one of the following:

• upload the file to catbox.moe and link it here (for clips up to 200MB)
• upload the file directly to their lemmy instance (if their instance allows it)
• self-host it on their own web server (with no bullshit crappy JS interface, please – just give me the file; I’ll play it with VLC if it doesn’t work in my browser)

PeerTube is also a reasonable choice – although I don’t like its UI very much.

I’m having trouble finding an example of the thumbnail issue again right now but I was seeing the pictrs conversion parameters passed to URLs from catbox.moe, i.postimg.cc, and other sources in the CSS for the thumbnail when I reported the issue to Tiff ~3 weeks ago. It’s possible that it got fixed/suppressed by another change since then though. (0.0.44 was deployed a few hours ago and I think there may have also been a beta patch bump for the lemmy backend at some point since I reported the issue originally in our local support community.)

I’ll let you know if I see it pop up again.

For the text handling issue, I was seeing text like “<thread title> by <username> in <community>” (i.e. "<thread title> by <username> in <community>" if it still happens) getting misinterpreted as raw HTML instead of being escaped. (i.e. <!-- raw HTML omitted --> was showing up in the HTML output for the page.)

You may recognize that text as the pattern for a recently fixed bug in the user profiles; I found the text handling issue while trying to explain the other issue to Tiff a few weeks ago.

Will edit this comment immediately after posting to let you know if I still see the text issue.

EDIT: I still see the text issue show up in this comment. https://old.reddthat.com/comment/10370610

Thanks! I’ll go ask Tiff about getting reddthat updated later.

BTW, is there a community for discussion of mlmym itself somewhere on lemmy? I can’t participate on GitHub, but those aren’t the only issues I’ve found. (e.g. there’s also ?format=jpg&thumbnail=96 on non-pictrs links and a text handling issue with angle brackets…)